Expert water testing in Troy, NY

Many homes throughout Rensselaer, Saratoga, Warren, and Washington counties rely on private wells, and Culligan of Troy can help test your well water. Our free in-home water test checks for common concerns, including hardness and iron. Hydrogen sulfide, which can cause a rotten-egg odor, is another potential concern in local well water. For more comprehensive testing, water samples can be sent to Culligan's Illinois EPA-certified laboratory for analysis of bacteria, nitrate, arsenic, lead, or PFAS. The EPA recommends testing private wells at least once a year. Call (518) 203-1661 or schedule a free well water test online.

No. Culligan's free water test checks for hardness, chlorine, pH, iron, and total dissolved solids (TDS). It does not determine whether lead, PFAS, or bacteria are present, as these contaminants require laboratory analysis. Based on your water source and specific concerns, a Culligan of Troy water expert may recommend sending a sample to Culligan's Illinois EPA-certified laboratory for additional testing, including PFAS, arsenic, lead, bacteria, or nitrate analysis.

Start by contacting your local water utility, as many providers offer lead testing services or information about lead service lines. Culligan of Troy can also send a water sample to Culligan's Illinois EPA-certified laboratory for lead analysis. Because lead cannot be seen, smelled, or tasted, a standard hardness or TDS test cannot detect it. If laboratory testing identifies lead in your water, ask your Culligan water expert about drinking water filtration systems certified for lead reduction.

The EPA recommends that private well owners test their water at least once a year for total coliform bacteria, nitrates, total dissolved solids (TDS), and pH. Additional testing is recommended after flooding, well repairs, or noticeable changes in water taste, color, or odor. Homeowners using municipal water in Troy and surrounding Capital Region communities should review their utility's annual Water Quality Report and consider testing when moving into a new home, following plumbing work, or noticing water spots, staining, or changes in taste.

Yes. Some substances, including lead and certain other contaminants, may be present in drinking water without noticeable changes in color, taste, or odor. Hardness minerals can also be present without obvious signs. Your utility's annual Water Quality Report reflects water quality within its distribution system but does not necessarily account for conditions in your home's plumbing. Testing your water at the tap can help identify potential concerns specific to your household. Laboratory analysis is needed to detect contaminants such as lead, PFAS, and bacteria.

Often, yes. Hardness minerals can react with soap, leaving behind residue on skin, hair, and fabrics. This buildup may contribute to dry-feeling skin, dull hair, and stiff laundry. A water hardness test can help determine whether mineral buildup may be contributing to these concerns. Some Troy-area homeowners notice improvements after installing a Culligan water softener. If dry skin persists, consult a medical professional to explore other possible causes.

Yes! Water quality can vary between homes, even within the same neighborhood, due to differences in plumbing age, existing water treatment equipment, and water sources. A free Culligan in-home water test provides a baseline measurement of hardness, chlorine, pH, iron, and total dissolved solids (TDS). If your new home has older plumbing or relies on a private well, additional laboratory testing for lead or bacteria may also be recommended.