Quick answer: Yes, well water around Panama City can be safe to drink, provided it is tested and, where the results call for it, treated. No utility tests or treats a private well; that responsibility belongs to the owner. In Bay County about 9 percent of residents are on wells; in Washington, Jackson and Calhoun counties the share is closer to two-thirds. The problems we see most are iron staining, hydrogen sulfide odor, acidic water that eats copper plumbing, bacteria after heavy rain, salt near the coast, hardness that arrives with iron and, close to two military installations, unanswered questions about PFAS. The Florida Department of Health recommends testing for bacteria and nitrate at least once a year, and immediately after a flood.
Private wells are easy to overlook in Bay County because most people drink Deer Point Lake water delivered by the county. But the USGS county water-use survey counted roughly 15,600 Bay County residents on their own wells, concentrated north of the lake around Youngstown, Fountain, Southport and Bayou George. Drive 30 minutes inland and wells become the norm: about 66 percent of Jackson County residents around Marianna, 65 percent in Washington County around Chipley and Vernon, and 70 percent in Calhoun County around Blountstown are self-supplied. Gulf, Franklin and Walton counties run around 8 percent, mostly in the rural stretches between Wewahitchka, Apalachicola and Freeport.
A private well draws groundwater from your own property, independent of any treatment plant. With the right precautions it is fine for drinking, cooking and bathing. But a well owner has to take an active role, because wells are exposed to problems that county water customers never think about. Here is what private well owners in the Panama City area should know, and how the common problems get fixed.
Municipal water vs. private well water: what’s the difference?
Public systems like Bay County’s are regulated under the Safe Drinking Water Act and tested continuously. Private wells are not. Florida regulates how wells are built and permitted, and the Florida Department of Health’s private well program offers guidance and testing through county health departments, but ongoing water quality is the homeowner’s job.
Well water quality varies property to property, even along the same road. Depth matters most. Shallow wells in the sandy surficial aquifer pick up whatever is happening at the surface: iron from the soil, tannins from wetlands, bacteria after a storm, nitrate from a septic drainfield or pasture. Deeper wells into the Floridan Aquifer, the limestone formation that supplies Lynn Haven’s municipal wells and most of the inland counties, carry more dissolved minerals and sometimes sulfur. Hardness varies with depth and location, which is one more reason to test rather than assume.
Water quality also changes over time, with wet summers, dry spells and hurricanes, and because many problems have no taste, smell or color, annual testing matters even when the water seems unchanged.
Culligan of Panama City has treated well water across Bay, Gulf, Franklin, Washington, Jackson, Calhoun and Walton counties for decades. These are the issues we see most.
Common well water problems in the Panama City area
1. Iron
What homeowners notice: Rust-colored rings in toilets, orange stains on tubs and white laundry, a metallic taste. The water often runs clear from the tap and turns orange as it sits.
What causes it: The sandy, iron-bearing soils and clays of the Panhandle dissolve into shallow groundwater. FDEP’s 2024 sampling of Deer Point Lake, which is fed by that groundwater, measured 310 micrograms per liter of iron in the raw water before the county plant removed it. A private well skips the plant.
Why it matters: Iron stains everything it touches, feeds iron bacteria that slime up plumbing, and fouls softener resin, which is why UF/IFAS recommends testing for iron and manganese before buying a softener.
How to fix it: A Culligan Aquasential® Smart High Efficiency Iron-Cleer® filter or an Iron-OX5 at the point of entry. When moderate hardness comes with it, the Softener-Cleer handles both in one system. See well water options for Panama City.
2. Hydrogen sulfide (rotten-egg odor)
What homeowners notice: A sulfur smell from faucets and showers, strongest in hot water and when the house has been closed up.
What causes it: Hydrogen sulfide gas forms naturally as organic matter breaks down in groundwater; sulfur bacteria in the well or water heater add to it. If the odor is only in hot water, the heater’s anode rod is the likely source. UF/IFAS lists hydrogen sulfide first among the tests to run when the complaint is taste or smell.
Why it matters: It makes water unpleasant to drink and cook with, tarnishes silverware and corrodes plumbing. It is the most common well complaint we hear from Youngstown, Wewahitchka and the Washington County wells around Vernon.
How to fix it: If testing confirms hydrogen sulfide in the source water, a Culligan Sulfur-Cleer® or Sulfur-OX3 filter removes it for the whole home. If it is only in hot water, service the heater first.
3. Low pH and corrosive water
What homeowners notice: Blue-green stains in sinks and tubs, a metallic taste, pinhole leaks in copper pipe.
What causes it: Low-alkalinity water is naturally aggressive toward metal. FDEP’s Deer Point Lake sample had alkalinity of just 33 mg/L and a pH near 7.1, and shallow wells in the same sandy terrain often run lower. Bay County adds lime and zinc orthophosphate to protect its pipes; a private well has no such buffer.
Why it matters: Corrosive water dissolves copper and, in older homes, lead from solder and brass. UF/IFAS advises testing for pH, corrosivity and lead whenever plumbing shows corrosion; the Florida Department of Health recommends a lead test every three years.
How to fix it: A neutralizing filter at the point of entry raises pH ahead of the plumbing. For drinking water, Culligan’s Aquasential® Smart Reverse Osmosis System is certified to reduce lead by 99.7 percent.
4. Bacteria (total coliform and E. coli)
What homeowners notice: Usually nothing, which is exactly why annual testing is the rule.
What causes it: Coliform bacteria live in soil and surface water and reach a well through a cracked or shallow casing, a poor cap seal, runoff after heavy rain, flooding or a nearby septic drainfield. Low-lying wells in Gulf and Franklin counties and along Bay County’s bayous are the most exposed, and the mandatory boil-water notice Bay County issued for Hurricane Michael on October 10, 2018 is a reminder that a storm can compromise even a treated system.
Why it matters: Total coliform by itself is rarely harmful, but it signals a pathway for disease-causing organisms. E. coli indicates contamination from human or animal waste. If it is detected, stop using untreated well water for drinking and food preparation and contact your county health department. The state recommends testing a flooded well immediately, before using it again.
How to fix it: Correct the source with a well professional, shock-disinfect the well and plumbing, and retest. For ongoing protection, UV disinfection treats water as it enters the home, and for drinking water Culligan’s Aquasential® Smart Reverse Osmosis System with the Advanced Post Tank Filter is certified under NSF Protocol P231 to reduce bacteria by more than 99.9999 percent.
5. Salt and chloride near the coast
What homeowners notice: A salty or brackish taste, white crust on fixtures, corroded appliances.
What causes it: Wells close to the Gulf and St. Andrew Bay, from Panama City Beach and Inlet Beach to Mexico Beach, Port St. Joe and Apalachicola, can draw seawater into the freshwater zone, especially in dry years or after storm surge. UF/IFAS recommends testing wells near seawater for chloride, total dissolved solids and sodium.
Why it matters: Chloride corrodes plumbing and appliances, and sodium matters for anyone on a restricted diet. A softener does not remove salt.
How to fix it: Reverse osmosis removes dissolved salts. An Aquasential® Smart Reverse Osmosis System handles drinking and cooking water; for whole-home needs we size a solution after testing.
6. Nitrate and PFAS: the lab-only contaminants
What homeowners notice: Nothing. Both are colorless, odorless and tasteless.
What causes it: Nitrate reaches shallow groundwater from fertilizer, livestock and septic systems, which makes it most relevant to rural wells in Jackson, Washington and Calhoun counties. PFAS come from firefighting foam and industrial sources; the Florida Department of Environmental Protection’s August 2024 list of federal facilities with reported PFOS and PFOA contamination includes Tyndall Air Force Base and Naval Support Activity Panama City, which puts wells in Callaway, Parker and the Tyndall corridor on our list for a lab test.
Why it matters: Elevated nitrate is a serious risk to infants under six months, which is why the Florida Department of Health includes it in the annual test it recommends. PFAS persist for decades, and no Bay County utility has yet published results for the public supply, let alone for private wells.
How to fix it: Culligan’s Aquasential® Smart Reverse Osmosis System with Total Defense is certified to reduce total PFAS by more than 99.99 percent, and the Whole Home PFAS Water Filter is certified to reduce total PFAS by more than 99 percent. For nitrate, reverse osmosis treats drinking water and the Nitrate Reduction Conditioner treats the whole home.
How to check your well water quality
Look for the signs. Orange stains, a sulfur smell, blue-green marks on fixtures, a salty taste or cloudy water each point to something specific and treatable.
Use the state and county resources. The Florida Department of Health’s private well program explains recommended tests and lets you submit bacteria and nitrate samples through your county health department or a state-certified laboratory. UF/IFAS Extension publishes a guide to which tests fit which symptoms.
Test every year, and whenever conditions change. The Florida Department of Health recommends bacteria and nitrate at least annually and lead every three years. Around Panama City, add iron, hydrogen sulfide and pH, and near the coast chloride and sodium. Test again after flooding or work on the well, if the water changes, and before an infant drinks it. Culligan of Panama City’s free in-home test covers hardness, iron, pH, chlorine and total dissolved solids on the spot, and we arrange certified lab testing for bacteria, nitrate, lead, arsenic and PFAS when the situation calls for it. Learn more about water testing in Panama City.
Get local well water expertise from Culligan of Panama City
Culligan of Panama City has helped private well owners from Youngstown and Fountain to Wewahitchka, Port St. Joe, Chipley, Marianna, Blountstown, Freeport and DeFuniak Springs turn iron-stained, sulfur-smelling or acidic water into water they are glad to drink. Every well is different, even next door to another. We explain the results, tell you plainly whether treatment is needed, offer rental and purchase options, and handle installation, salt delivery and ongoing service so you have local support long after the system goes in.
Ready for better well water? Schedule your free in-home water test and consultation with Culligan of Panama City today.
Frequently asked questions about private wells around Panama City
Where does Panama City-area well water come from?
Shallower wells draw from the sandy surficial aquifer; deeper wells reach the Floridan Aquifer, the limestone formation that also supplies Lynn Haven’s municipal wells and most of Jackson, Washington and Calhoun counties. Shallow wells carry more iron, tannins and surface influence; deeper wells carry more minerals and sometimes sulfur.
How often should I test my private well in Bay, Gulf or Washington County?
The Florida Department of Health recommends bacteria and nitrate at least once a year and lead every three years, with immediate testing after a flood. Locally we add iron, hydrogen sulfide and pH.
Why does my well water near Panama City smell like rotten eggs?
Hydrogen sulfide, produced naturally in groundwater and by sulfur bacteria in wells and water heaters. If the odor is only in hot water, the heater is the likely source; if it is in both, the well is, and a Sulfur-Cleer filter is the usual fix.
Is my well at risk after a hurricane or flooding?
Yes, particularly in low-lying areas along the bays and the Gulf. Floodwater can carry bacteria and surface contaminants into the wellhead. Use bottled water, test for bacteria and nitrate as soon as the water recedes, and disinfect the well before drinking from it again.





