Can You Safely Drink the Well Water in the Ontario, CA Area?

Published: November 15, 2026

Quick answer: Yes, well water in the Ontario area can be safe to drink, provided it is tested regularly and treated when the results call for it. No utility monitors a private well, so the owner carries that job. The Inland Empire’s groundwater has specific, documented issues: nitrate and salts in the southern Chino Basin, naturally occurring arsenic and fluoride in some Temecula-area wells, perchlorate in agricultural wells in both counties, high dissolved solids, and hardness that commonly runs 9 to 20 grains per gallon. Most cannot be seen or tasted, which is why California’s State Water Resources Control Board recommends annual laboratory testing for every private well.

Most Inland Empire homes are on public water, but private wells remain a fact of life at the edges of the valley: in the Chino agricultural preserve south of Ontario and Chino, in Temecula Valley Wine Country and the surrounding ranch properties, in the hills around Lake Elsinore and Perris, and in pockets of rural Fontana and Riverside County. Culligan of Ontario has worked on those wells for decades. This guide explains what makes a well different from a city connection, which problems show up in local groundwater according to the agencies that monitor it, how to get a well tested in San Bernardino and Riverside counties, and what treatment fixes each problem.

Municipal water vs. private well water: what changes

A public system like Ontario Municipal Utilities Company samples constantly, blends sources to stay within limits and publishes the results each year. A private well skips all of that. San Bernardino County Environmental Health Services and the Riverside County Department of Environmental Health require a permit and a licensed C-57 contractor to drill, modify or destroy a well, and the state has a construction advisory on sealing materials so a poorly grouted casing does not become a path for surface contamination. Once the permit is closed, water quality is the owner’s responsibility.

Well water also changes over time. Nitrate moves with irrigation and septic return flow, bacteria arrive after storms, arsenic and fluoride vary with pumping depth, and a well that tested clean ten years ago may not today. The State Water Board’s Guide for Private Domestic Well Owners recommends testing every year for total coliform bacteria, nitrate and electrical conductivity, and every five to ten years for metals such as arsenic, lead, iron and manganese, or sooner if taste, odor, color or nearby land use changes.

Why the Chino Basin is a special case

The groundwater under Ontario, Chino, Chino Hills and Eastvale has been managed under a court judgment since the 1970s. The Chino Basin Desalter Authority’s own history explains why: heavy pumping lowered water levels and raised salt and nitrate in the lower basin, and the 1998 Optimum Basin Management Plan set a goal of pumping 40,000 acre-feet a year from the degraded southern end and treating it to drinking standards. Even after that treatment, the groundwater Ontario purchases from Jurupa Community Services District averaged 6.1 mg/L of nitrate in 2025 with a high of 8.5 mg/L against a 10 mg/L limit. A private well in the agricultural preserve taps the same aquifer with no desalter in between. That is the single most important thing a Chino-area well owner should know.

Common well water problems in the Ontario area

The following are the issues most relevant to private wells in our service area, with what state and utility sources show about each.

1. Nitrate

What homeowners notice: Nothing. Nitrate is colorless, odorless and tasteless.

What causes it: Fertilizer, livestock operations and septic systems over decades. The southern Chino Basin is the regional example; San Bernardino County Environmental Health Services links well owners to the State Water Board’s online tool that shows whether a property sits near a nitrate-impacted well.

Why it matters: The California limit is 10 mg/L as nitrogen, and nitrate above that level is a health risk for infants under six months. Public wells in the basin run 5 to 8.5 mg/L even after blending; untreated private wells in the preserve can test higher. Only a lab test tells you.

How to fix it: Culligan’s Nitrate Reduction Conditioner treats nitrate throughout the home, and a nitrate-certified Aquasential® Smart Reverse Osmosis System covers drinking and cooking water.

2. Hardness and high dissolved solids

What homeowners notice: Heavy scale on fixtures and in the water heater, a flat or brackish taste, white residue on anything that dries.

What causes it: Groundwater moving through alluvium dissolves calcium, magnesium and other salts, and in the lower basin the salt load is the reason the desalters were built.

Why it matters: Rancho California Water District’s own wells near Temecula test up to 340 mg/L of hardness, nearly 20 gpg, and up to 730 mg/L of total dissolved solids. Eastern Municipal Water District’s Perris Valley wells average 20 gpg of hardness and 812 mg/L of TDS. Private wells in the same formations are usually in the same range or above it.

How to fix it: An Aquasential® Smart High Efficiency Water Softener for hardness, or Softener-Cleer where iron is present too, and reverse osmosis at the kitchen sink for taste and dissolved solids. In Ontario, Chino, Chino Hills, Upland, Fontana and Rancho Cucamonga, a home that drains to the sewer falls under the IEUA ordinance prohibiting new self-regenerating softeners, and Culligan’s Portable Exchange Tank service is the compliant alternative; we confirm the rule for each property before recommending equipment.

3. Arsenic and fluoride

What homeowners notice: Nothing. Neither has a taste or color at the levels found in groundwater.

What causes it: Natural geology. Arsenic and fluoride dissolve from certain rock formations, and concentrations can vary sharply between neighboring wells and between depths in the same well.

Why it matters: Rancho California Water District reports arsenic in its wells from none detected to 18.8 micrograms per liter, above the 10 µg/L limit in 3 of 39 active wells, and fluoride up to 3.3 mg/L, above the 2.0 mg/L limit in 2 wells; the district blends those wells to stay compliant. A private well in Wine Country has no blending. Long-term arsenic exposure raises cancer risk, and the State Water Board lists arsenic and uranium among naturally occurring substances California well owners should test for.

How to fix it: The Aquasential® Smart Reverse Osmosis System with arsenic filtration for drinking water, or a whole-home arsenic reduction filter. Reverse osmosis also reduces fluoride and uranium.

4. Perchlorate

What homeowners notice: Nothing detectable.

What causes it: Rocket propellant, fireworks and flare manufacturing. The State Water Resources Control Board documents a fireworks site near Rialto in San Bernardino County where an inactive well tested at 270 ppb and 24 agricultural wells in Riverside and San Bernardino counties tested at 11 to 221 ppb.

Why it matters: California’s limit is 6 ppb and the public health goal is 1 ppb. Public wells in Ontario, Riverside and Fontana run 1 to 4 ppb; a private well near an old industrial or agricultural site may be higher, and only a lab test tells.

How to fix it: Reverse osmosis at the point of use.

5. Bacteria

What homeowners notice: Usually nothing, occasionally a change in taste or cloudiness after a storm.

What causes it: Coliform bacteria live in soil and surface water and enter through a cracked or shallow casing, a loose cap or runoff after heavy winter rain; nearby septic systems and livestock raise the odds.

Why it matters: Total coliform signals that a pathway exists; E. coli indicates waste contamination. If E. coli is found, stop using the water for drinking and cooking and contact the Riverside County Department of Environmental Health or San Bernardino County Environmental Health Services for disinfection guidance. A clean result last year proves nothing about this year.

How to fix it: Correct the well defect, disinfect and retest. For ongoing protection, UV disinfection where water enters the home, and for drinking water the Aquasential® Smart RO with the Advanced Post Tank Filter, certified under NSF Protocol P231 to reduce bacteria by more than 99.9999 percent.

6. Iron, manganese and sulfur odor

What homeowners notice: Orange or black staining in toilets and laundry, a metallic taste, or a rotten-egg smell that may be stronger in hot water.

What causes it: Dissolved iron and manganese from the aquifer, and hydrogen sulfide from sulfur bacteria or reactions in the water heater. The State Water Board lists iron and manganese among the metals to test periodically.

Why it matters: These are nuisance issues rather than health standards, but they ruin fixtures and laundry. An odor only in hot water usually points to the water heater rather than the well.

How to fix it: Iron-Cleer® or Iron-OX5 for iron and manganese staining, Sulfur-Cleer® or Sulfur-OX3 for hydrogen sulfide, sized after a test identifies which form is present.

How to check your well water in the Ontario area

Look for signs. Scale, staining, odor, cloudiness and a salty taste each point to something testable. No signs does not mean clean water; nitrate, arsenic and bacteria give no warning.

Use the county and state resources. San Bernardino County Environmental Health Services’ Safe Drinking Water program at ehs.sbcounty.gov covers permits, well construction and nitrate information; the Riverside County Department of Environmental Health at rivcoeh.org handles wells in Riverside County. The State Water Board’s Guide for Private Domestic Well Owners sets out the testing schedule, and its GAMA program offers a lookup for nitrate-impacted wells near your address.

Test on a schedule. Annually for coliform bacteria, nitrate and conductivity; every five to ten years for arsenic and other metals; and right away if the well has never been tested, if taste or appearance changes, after flooding or well repairs, or if an infant or pregnant household member will drink the water. Culligan of Ontario collects samples at your property for a certified laboratory and runs hardness, pH, iron and TDS readings on the spot. See our Ontario water testing page.

FAQs about private wells in the Ontario area

Where does well water around Ontario come from?
From alluvial aquifers of sand and gravel: the Chino Basin under Ontario, Chino and Eastvale, the Cucamonga Basin under Rancho Cucamonga, the Rialto and Lytle basins under Fontana, the Bunker Hill and Riverside basins under Riverside, and the Temecula-area aquifers of the Santa Margarita watershed. Depth and location decide which water a given well draws.

How often should I test a well in San Bernardino or Riverside County?
The State Water Board recommends annual tests for total coliform bacteria, nitrate and electrical conductivity, and metals including arsenic every five to ten years. Test sooner after flooding, well work or a change in taste, color or odor.

Is nitrate a problem in Chino-area wells?
It is the signature issue of the southern Chino Basin. Rising nitrate and salts are the documented reason the Chino Basin Desalter Authority was formed, and public wells in the basin still run 5 to 8.5 mg/L after blending. A private well in the agricultural preserve should be tested for nitrate every year.

Why does my well water smell like rotten eggs?
Hydrogen sulfide, produced by sulfur bacteria in the well or by reactions inside a water heater. If the smell is only in hot water, start with the heater. If it is in both, a Sulfur-Cleer filter treats it at the point of entry.

Can arsenic really be in Temecula-area well water?
Yes. Rancho California Water District reports arsenic up to 18.8 µg/L in some of its own wells, above the 10 µg/L limit, and fluoride up to 3.3 mg/L. The district blends those wells; a private well owner has to test and treat instead.

Get local well water expertise from Culligan of Ontario

Culligan of Ontario has helped private well owners across the Chino agricultural preserve, Temecula Valley Wine Country, the Lake Elsinore and Perris hills and rural parts of Fontana, Riverside, Corona, Menifee and Murrieta for decades. Every well is different, so we start with testing rather than assumptions. Our technicians help you read lab results, decide whether further testing is warranted and match treatment to what is in the water, from softening and iron filtration to nitrate and arsenic reduction, reverse osmosis and UV. We install, maintain and service what we recommend. Our Ontario well water solutions page has more on each option.

Ready for better well water? Schedule your free in-home water test and consultation with Culligan of Ontario today.

Resources for homeowners in Ontario

Schedule your free water consultation

Our Culligan water experts are ready to help you find the right solution for your water, starting with your free in-home water test and consultation.

Enter your information

Fields marked * are required fields.

By opting in, you are agreeing to receive SMS messages from Culligan. Alerts at the phone number listed above. 4 msgs/month. If you have questions, text HELP to 73777 or contact Customer Service at 1-855-558-1684 or customerservice@culligan.com. You can opt-out of the subscription anytime by texting STOP to 73777. Msg&data rates may apply. You can view the Terms and Conditions here and Privacy Policy here.