PFAS Water Contamination in Ontario
In addition to water scarcity, more attention is being called to water quality in Southern California, and at a national level. A growing concern for Southern California, PFAS water contamination impacts residents from San Bernardino to Los Angeles, which have all been tested to show levels of PFAS in the water.
These elevated levels have been detected in municipal water, well water, and surface water sources ranging from Santa Clarita to Yorba Linda. With most of Los Angeles and greater southern California impacted, officials are scrambling to test water and evaluate treatment methods, while residents are left wondering what to expect and what they can do to access safe, high-quality drinking water.
What are PFAS?
The problem with PFAS and similar contaminants is that, until recently, few people knew or understood what they are. Compounding this issue, PFAS have become nearly ubiquitous in our environment.
It started in the early 1940s, when water and heat-resistant chemicals containing per- and polyfluoroalkyl substances were engineered to help create non-stick products (Teflon), fire retardants, and other common consumer goods. What wasn’t understood at the time, however, was that PFAS Teflon and other products using PFAS wouldn’t naturally decay in nature, or the human body.
Known as bioaccumulation, this chemical characteristic means any amount absorbed into our bodies – through eating or drinking – stays in our bodies. Since we have no way of removing or disposing of these chemicals, they’ve earned the ominous nickname, ‘forever chemicals.’ As a result, most PFAS have been phazed out of use in this country, but they remain prevalent in the environment and often that includes our water supply.
Is My Water Contaminated?
Certain areas have a higher propensity for PFAS-contaminated water. For example if you live near an airport or a firefighter training facility where many of these chemicals have historically been used, there’s a good chance they’re still found in relatively high concentrations. Areas around manufacturing centers also commonly have elevated levels of PFAS, since they were used in the production of carpet, food packaging and production, and many other consumer goods.
PFAS and PFOAS have even been found in areas removed from this kind of activity since they persist in the environment. Studies show that as much as 98% of the population register some level of PFAS in their bodies.
The best way to know if you have PFAS-contaminated water is to have your home’s water tested. With a free home water test from Culligan, you’ll get results back in as little as a few minutes, and your local Culligan Man can review the results with you to help you understand what you’re dealing with, and how to treat it if necessary.
Remove and Prevent PFAS Contamination
There may not be any ways to prevent PFAS contamination in the environment, but you can make sure the water you’re drinking is PFAS free. If there is good news regarding PFAS water contamination, it’s that they can be treated and removed from water with the right filtration. For example, several methods, like carbon filtration, ion exchange, and reverse osmosis water treatment effectively remove PFAS from water.
Once again, your local Culligan Man can help you understand whether you have PFAS in your water, and if they’re at a level that you should consider treating them with a drinking water system or a whole-house filtration system. Contact us today to schedule your free home water test to turn on the safest, best tasting water right at home.
Find A Location Near Me
Schedule Your Free
In-Home Water Test
Get better water in your home by scheduling an appointment with your local Culligan Water Expert.
See All Articles
Water Pressure Low In Your House? Start Here
Experiencing low water pressure? Hard water may be to blame.
8 min read