Can You Safely Drink the Tap Water in Kingsland?

Published: November 15, 2026

Quick answer: Yes, with context. The City of Kingsland’s 2025 Water Quality Report states that the system remained in full compliance throughout 2025, with zero positive coliform samples and a lead 90th percentile of 0 ppb. The year before was different: the city’s 2024 report lists three violations of the total trihalomethane (TTHM) standard, one in each of the first three quarters of 2024. Compliance means the water met federal limits over the reporting period. It does not mean the water is free of chlorine, disinfection byproducts, minerals, sulfur or anything else the rules do not cover, and the report measures water in the system, not at your tap.

Kingsland sits on top of one of the biggest freshwater reserves in the Southeast, and the water that comes out of the tap has been underground for a very long time. That is good news for supply and mixed news for taste. Homeowners here ask us about a sulfur smell, a mineral or salty note, chlorine in the shower, and whether anything from Naval Submarine Base Kings Bay reaches their well. Here is what the public record says, and where it goes quiet.

What the water quality report covers, and what it leaves out

EPA regulates more than 90 contaminants in public drinking water, and the City of Kingsland and the City of St. Marys test for them on the schedules Georgia EPD sets. Those tests are the basis for the annual report each utility publishes. Three gaps matter to a homeowner.

First, the limits are set with treatment cost and feasibility in mind, not safety alone. Second, the samples are drawn at the wells and at points in the distribution system, so they describe the water the city sends out, not what arrives after it passes through the mains under Highway 40, the service line to your house and the plumbing inside it. Third, the report has nothing to say about hardness, hydrogen sulfide, sodium or chloride, because those are aesthetic concerns rather than health-based standards. In a Floridan Aquifer town those are precisely the things people notice.

Where Kingsland’s drinking water comes from

All of Kingsland’s water is groundwater from the Upper Floridan Aquifer. According to the city’s 2025 Water Quality Report, Wells 1 and 2 at Water Treatment Plant 1 on South Grove Boulevard are about 860 and 820 feet deep, and Wells 3 and 4 at Plant 2 on East Colerain Road are about 720 feet. Water is disinfected with sodium hypochlorite at the well sites and the chlorine residual is checked daily. St. Marys operates three wells 800 to 1,100 feet deep in the same aquifer with a combined capacity of about 3.5 million gallons per day. Naval Submarine Base Kings Bay runs its own separate water system and publishes its own Consumer Confidence Report for base housing.

The Floridan is thick, porous limestone capped by the clays of the Hawthorn Group, which is why it is so well protected from surface spills and why it carries so much dissolved mineral. The Georgia Geologic Survey classifies Camden County’s Floridan water as calcium-magnesium-sulfate type. The USGS has found chloride in county wells generally between 30 and 50 mg/L, low compared with the 250 mg/L standard but higher than most inland groundwater.

Five water quality issues Kingsland homeowners actually run into

1. Chlorine taste and odor

What you notice: A pool-like smell when you fill a glass or turn on the shower, especially close to the treatment plants.

What causes it: Kingsland maintains a free chlorine residual of 1 to 2 ppm throughout the system; St. Marys reported a 0.84 ppm average. The residual is there to keep bacteria from growing in the pipes.

Why it matters: The maximum allowed is 4 ppm, so the level is within limits. It is also enough to taste, to dry skin and to react with organic matter in the water to form the byproducts described next.

How to fix it: A reverse osmosis system under the sink removes chlorine from drinking and cooking water. A whole-house carbon filter such as the Aquasential® Smart HE Water Filter takes it out of every tap. Both are described on our Kingsland location page.

2. Disinfection byproducts (TTHMs)

What you notice: Nothing. Trihalomethanes have no taste or smell at the levels found in tap water.

What causes it: Chlorine reacts with naturally occurring organic matter. Groundwater that has moved through peat-rich coastal sediments carries enough of it to matter.

Why it matters: The federal limit is 80 micrograms per liter as a locational running annual average. Kingsland’s 2024 report shows an average of 76 with individual results from 60.5 to 94.9, and records TTHM violations for the first, second and third quarters of 2024. The 2025 report shows a highest level of 74 with a range of 52 to 105.8 and no violation. St. Marys reported an average of 58.8 with a high sample of 93.4 in its 2020 report. Long-term exposure to elevated TTHMs is associated with increased health risks, which is why the standard exists.

How to fix it: The carbon stages in an Aquasential® Smart Reverse Osmosis system reduce TTHMs in drinking water, and a whole-house carbon filter reduces them in shower steam as well.

3. Hard water

What you notice: White crust on faucets, spotted glassware, soap that will not lather, a rumbling water heater.

What causes it: Floridan limestone loads the water with calcium and magnesium. Neither Kingsland nor St. Marys softens the water or publishes a hardness figure.

Why it matters: USGS samples of Camden County aquifers near Waverly measured 204 and 229 mg/L as calcium carbonate, which is 11.9 to 13.4 grains per gallon and classified as very hard. Scale at that level shortens the life of water heaters and appliances and makes cleaning a chore.

How to fix it: An Aquasential® Smart High Efficiency Water Softener removes the minerals before they reach your fixtures.

4. Hydrogen sulfide and mineral taste

What you notice: A rotten-egg smell, mainly from hot water or a tap that has sat overnight, and a flat, mineral or slightly salty taste.

What causes it: Bacteria in the sulfate-rich limestone convert sulfate to hydrogen sulfide gas. The Jekyll Island Authority in Glynn County aerates its raw Floridan water specifically to strip the gas before chlorination. Sodium and chloride add the salty note; St. Marys reported 33 ppm sodium in 2018.

Why it matters: Chlorination removes most sulfide from city water, but traces survive, and water heaters can regenerate the smell. None of it is a health concern at these levels; all of it affects whether you want to drink the water.

How to fix it: Reverse osmosis removes dissolved salts and improves taste at the kitchen sink. If sulfide persists house-wide, a Sulfur-Cleer® filter oxidizes and removes it.

5. PFAS

What you notice: Nothing. PFAS cannot be tasted or smelled.

What causes it: PFAS are manufactured chemicals used for decades in firefighting foam, coatings and industrial processes. Military installations that trained with foam are a documented source nationally, which is why Kings Bay comes up in conversation here.

Why it matters: Neither the Kingsland nor the St. Marys report lists PFAS results, and we have not located published figures for either city system. EPA set enforceable limits of 4.0 parts per trillion for PFOA and PFOS in April 2024; systems must finish initial monitoring by 2027 and comply by 2029. Georgia EPD has run three rounds of statewide PFAS sampling, including one focused on systems near significant Department of Defense installations. Until results are public, the only way to know your tap is a certified lab test.

How to fix it: The Aquasential® Smart Reverse Osmosis with Total Defense is certified to reduce total PFAS by more than 99.99 percent. The Whole Home PFAS Water Filter reduces total PFAS by more than 99 percent at every tap.

Lead: what the reports say

Kingsland’s lead 90th percentile was 0 ppb in both its 2022 and 2025 sampling rounds, with no sites above the 15 ppb action level, and St. Marys reported 0.00 ppb across 30 sites in 2019. Those are good numbers, drawn from a small set of volunteer homes. Lead comes from household plumbing rather than the aquifer, and homes built before 1986 may have lead solder or brass fixtures. A lab test is the only way to know, and the Aquasential® Smart Reverse Osmosis system is certified to reduce lead by 99.7 percent if it turns up.

City water versus private wells in Camden County

About one in four Camden County residents, roughly 14,000 people according to USGS 2015 estimates, are on private wells that no utility tests. In Charlton County it is nearly half. Well owners around Woodbine, Waverly and Folkston get the same Floridan or shallower aquifer water the cities use, without chlorination and without anyone else’s monitoring, so hydrogen sulfide, iron, hardness and bacteria after floods are their problems to catch. Georgia DPH recommends a bacteria test every year and the W33C chemical screen every three years. Our well water solutions page covers testing and treatment for wells.

How to check your water quality in Kingsland

Read the report. The City of Kingsland posts its annual Water Quality Report on the Municipal Utilities page; St. Marys publishes its Consumer Confidence Report through Public Works. Look at chlorine residual, TTHMs, fluoride, lead and any violations table.

Notice what your house is telling you. Kingsland and St. Marys homeowners most often mention a sulfur or chlorine smell, white scale on fixtures, spotted glasses, a salty or flat taste, dry skin after showering, and orange staining where iron is present.

Test at the tap. Culligan of Kingsland’s free in-home test reads hardness, chlorine, total dissolved solids, pH and iron in about 20 minutes. For bacteria, nitrate, lead, arsenic or PFAS we collect samples for a certified laboratory and review the results with you. Testing matters most if you are on a well, live in a home built before 1986, have an infant or pregnant family member, or have noticed a change in taste, smell or color.

Frequently asked questions about Kingsland tap water

Can I drink Kingsland tap water straight from the faucet?
The city’s 2025 report shows full compliance with federal standards and no lead or coliform findings. The 2024 report recorded three TTHM violations. Meeting standards is not the same as having no chlorine, byproducts, minerals or sulfur, and the report does not measure your tap.

Does Kingsland use chlorine or chloramine?
Free chlorine, added as sodium hypochlorite at the well sites, with a residual of 1 to 2 ppm. Chlorine is easier to remove than chloramine; a carbon filter or reverse osmosis system handles it.

Is there fluoride in Kingsland water?
The 2025 report lists 0.52 ppm from a 2023 sample and attributes it to natural deposits. St. Marys reported 0.64 ppm in 2020. Both are well below the 4 ppm limit. Reverse osmosis removes most fluoride for households that prefer that.

Does the city soften the water?
No. Kingsland and St. Marys treat for regulated contaminants but do not remove calcium and magnesium. A water softener is a household decision.

Has PFAS been found in Kingsland water?
No results are published in the city reports. Federal limits took effect in 2024 with monitoring due by 2027, and Georgia EPD has sampled systems near military installations. A certified lab test is the only way to know your own water today.

Schedule a free water test with Coastal Culligan of Kingsland

Coastal Culligan of Kingsland has served Camden County homes for decades, in Kingsland, St. Marys, Woodbine, Waverly and the neighborhoods around Kings Bay, along with Folkston, Brunswick and St. Simons Island.

A local technician will test your water, walk through the results in plain language and answer your questions. If treatment is worth considering, we explain rental and purchase options and leave a written quote. Salt delivery, bottled water delivery and ongoing service come from the same local team.

Ready for better water? Schedule your free in-home water test with Coastal Culligan of Kingsland today.

Resources for homeowners in Kingsland

Schedule your free water consultation

Our Culligan water experts are ready to help you find the right solution for your water, starting with your free in-home water test and consultation.

Enter your information

Fields marked * are required fields.

By opting in, you are agreeing to receive SMS messages from Culligan. Alerts at the phone number listed above. 4 msgs/month. If you have questions, text HELP to 73777 or contact Customer Service at 1-855-558-1684 or customerservice@culligan.com. You can opt-out of the subscription anytime by texting STOP to 73777. Msg&data rates may apply. You can view the Terms and Conditions here and Privacy Policy here.